Uploud:
ID:
Size:
Width: Px
Height: Px
Source:

Another way to secure the sink is to use epoxy. A bead of epoxy is positioned around the under side belonging to the sink's lip. You can also place a bead of epoxy throughout the edge of the sink target. Drop the sink inside the hole and make sure you have a flush seam all the way around. If part of the sink is undoubtedly not flush, use the brackets under the counter to pull it straight down and secure it. If you have a flush joints, it means you have a very easy and level counter area. If this is the case, you can use simply epoxy to mount the sink and may not need any screws and brackets directly below. In either case, be sure to allow the epoxy to dry for the amount of time shown on the packaging. Usually do not touch the sink in any way during this period.

Image Editor

Inianwarhadi-

You can edit this image using this Inianwarhadi Tool before save to your device

You May Also Like