Uploud:
ID:
Size:
Width: Px
Height: Px
Source:

In the case of an undermount bar sink, the job is definitely more complicated. In fact, in most cases you should have a professional install the undermount sink. If you happen to have got a hole prepared inside your counter matching the technical specs of your sink, you can look at out the job yourself. The actual rising of the sink is not really the hard part. The problematic part is usually making and finishing the sink opening. Since the sink mounts underneath the cabinet, there is no flange demonstrating on the counter. This means the counter top has to have a round and finished edge leading down to the sink. That's where you are very likely to need a professional. If you happen to already have a prepared hole for your undermount bar sink, you can set up the sink yourself providing you are a little handy. When updating your counter top along with adding a sink, the easiest way to install the sink should be to do it before the counter top is going to be installed. You can epoxy the sink to the counter even though the counter is upside down. Following your sink has dried after that you can install the counter along with the sink already attached.

Image Editor

Inianwarhadi-

You can edit this image using this Inianwarhadi Tool before save to your device

You May Also Like