Uploud:
ID:
Size:
Width: Px
Height: Px
Source:

In the case of an undermount bar sink, the job is unquestionably more complicated. In fact, in most cases you should have a professional install your undermount sink. If you happen to have got a hole prepared in the counter matching the features of your sink, you can look at the job yourself. The actual mounting of the sink is certainly not the hard part. The challenging part is usually making and finishing the sink hole. Since the sink mounts within the cabinet, there is no flange exhibiting on the counter. This means the counter top has to have a round and finished edge leading down to the sink. This is how you are very likely to need a professional. If you happen to already have a prepared hole for your undermount bar sink, you can mount the sink yourself when you are a little handy. When upgrading your counter top along with adding a sink, the simplest way to install the sink is always to do it before the counter top is normally installed. You can epoxy the sink to the counter while the counter is upside down. Following your sink has dried you can then install the counter with all the sink already attached.

Image Editor

Inianwarhadi-

You can edit this image using this Inianwarhadi Tool before save to your device

You May Also Like