Uploud:
ID:
Size:
Width: Px
Height: Px
Source:

Another way to secure the sink is to use epoxy. A bead of epoxy is positioned around the under side belonging to the sink's lip. You can also create a bead of epoxy about the edge of the sink tooth cavity. Drop the sink in the hole and make sure you have a flush seam all the way around. If part of the sink is normally not flush, use the brackets under the counter to pull it straight down and secure it. Should you have a flush joints, it means you have a very soft and level counter area. If this is the case, you can use only epoxy to mount the sink and may not need virtually any screws and brackets beneath. In either case, be sure to allow the epoxy to dry for the amount of period shown on the packaging. Usually do not touch the sink whatsoever during this period.

Image Editor

Inianwarhadi-

You can edit this image using this Inianwarhadi Tool before save to your device

You May Also Like