Uploud:
ID:
Size:
Width: Px
Height: Px
Source:

In the case of an undermount bar sink, the job is certainly more complicated. In fact, in most cases you will need to have a professional install the undermount sink. If you happen to contain a hole prepared inside your counter matching the features of your sink, you can undertaking the job yourself. The actual rising of the sink is not really the hard part. The troublesome part is usually making and finishing the sink cup. Since the sink mounts beneath the cabinet, there is no flange displaying on the counter. This means the counter top has to have a rounded and finished edge leading down to the sink. This is how you are very likely to desire a professional. If you happen to already have a prepared hole for your undermount bar sink, you can set up the sink yourself as long as you are a little handy. When upgrading your counter top along with adding a sink, the best way to install the sink is usually to do it before the counter top is normally installed. You can epoxy the sink to the counter as the counter is upside down. After the sink has dried after that you can install the counter with all the sink already attached.

Image Editor

Inianwarhadi-

You can edit this image using this Inianwarhadi Tool before save to your device

You May Also Like