Uploud:
ID:
Size:
Width: Px
Height: Px
Source:

Another way to secure the sink is to use epoxy. A bead of epoxy is placed around the under side in the sink's lip. You can also create a bead of epoxy around the edge of the sink tooth cavity. Drop the sink inside the hole and make sure you have a flush seam all the way around. If part of the sink can be not flush, use the brackets under the counter to pull it down and secure it. If you have a flush joints, it means you have a very even and level counter surface area. If this is the case, you can use just simply epoxy to mount the sink and may not need any kind of screws and brackets below. In either case, be sure to allow the epoxy to dry for the amount of time shown on the packaging. Will not touch the sink by any means during this period.

Image Editor

Inianwarhadi-

You can edit this image using this Inianwarhadi Tool before save to your device

You May Also Like