Uploud:
ID:
Size:
Width: Px
Height: Px
Source:

Another way to secure the sink is to use epoxy. A bead of epoxy is positioned around the under side from the sink's lip. You can also create a bead of epoxy around the edge of the sink pin. Drop the sink in the hole and make sure you have a flush seam all the way around. If part of the sink is undoubtedly not flush, use the conference under the counter to pull it straight down and secure it. Your car or truck have a flush joints, it means you have a very soft and level counter surface. If this is the case, you can use merely epoxy to mount the sink and may not need any kind of screws and brackets directly below. In either case, be sure to allow the epoxy to dry for the amount of time shown on the packaging. Will not touch the sink by any means during this period.

Image Editor

Inianwarhadi-

You can edit this image using this Inianwarhadi Tool before save to your device

You May Also Like