Uploud:
ID:
Size:
Width: Px
Height: Px
Source:

Another way to secure the sink is to use epoxy. A bead of epoxy is placed around the under side from the sink's lip. You can also place a bead of epoxy about the edge of the sink gap. Drop the sink in the hole and make sure you have a flush seam all the way about. If part of the sink is normally not flush, use the mounting brackets under the counter to pull it straight down and secure it. If you do have a flush joints, it means you have a very consistent and level counter surface. If this is the case, you can use merely epoxy to mount the sink and may not need any kind of screws and brackets below. In either case, be sure to allow the epoxy to dry for the amount of period shown on the packaging. Will not touch the sink in any way during this period.

Image Editor

Inianwarhadi-

You can edit this image using this Inianwarhadi Tool before save to your device

You May Also Like