Uploud:
ID:
Size:
Width: Px
Height: Px
Source:

Another way to secure the sink is to use epoxy. A bead of epoxy is put around the under side with the sink's lip. You can also create a bead of epoxy throughout the edge of the sink pit. Drop the sink inside the hole and make sure you have a flush seam all the way about. If part of the sink is not flush, use the mounting brackets under the counter to pull it down and secure it. If you have a flush joints, it means you have a very soft and level counter surface. If this is the case, you can use only epoxy to mount the sink and may not need virtually any screws and brackets underneath. In either case, be sure to allow the epoxy to dry for the amount of time shown on the packaging. Tend not to touch the sink by any means during this period.

Image Editor

Inianwarhadi-

You can edit this image using this Inianwarhadi Tool before save to your device

You May Also Like