Uploud:
ID:
Size:
Width: Px
Height: Px
Source:

In the case of an undermount bar sink, the job is obviously more complicated. In fact, in most cases you will want to have a professional install your undermount sink. If you happen to possess a hole prepared inside your counter matching the technical specs of your sink, you can make an effort the job yourself. The actual hanging of the sink is certainly not the hard part. The difficult part is usually making and finishing the sink pit. Since the sink mounts underneath the cabinet, there is no flange exhibiting on the counter. This means the counter top has to have a curved and finished edge leading down to the sink. That's where you are very likely to need a professional. If you happen to already have a prepared hole for your undermount bar sink, you can install the sink yourself as long as you are a little handy. When exchanging your counter top along with adding a sink, the easiest way to install the sink should be to do it before the counter top is without question installed. You can epoxy the sink to the counter even though the counter is upside down. Following your sink has dried after that you can install the counter while using the sink already attached.

Image Editor

Inianwarhadi-

You can edit this image using this Inianwarhadi Tool before save to your device

You May Also Like