Uploud:
ID:
Size:
Width: Px
Height: Px
Source:

Another way to secure the sink is to use epoxy. A bead of epoxy is put around the under side with the sink's lip. You can also place a bead of epoxy throughout the edge of the sink target. Drop the sink in the hole and make sure you have a flush seam all the way around. If part of the sink is not flush, use the conference under the counter to pull it straight down and secure it. If you do have a flush joints, it means you have a very clean and level counter area. If this is the case, you can use just simply epoxy to mount the sink and may not need any screws and brackets underneath. In either case, be sure to allow the epoxy to dry for the amount of time shown on the packaging. Usually do not touch the sink at all during this period.

Image Editor

Inianwarhadi-

You can edit this image using this Inianwarhadi Tool before save to your device

You May Also Like