Uploud:
ID:
Size:
Width: Px
Height: Px
Source:

Another way to secure the sink is to use epoxy. A bead of epoxy is positioned around the under side from the sink's lip. You can also create a bead of epoxy throughout the edge of the sink location. Drop the sink in the hole and make sure you have a flush seam all the way around. If part of the sink is going to be not flush, use the mounting brackets under the counter to pull it down and secure it. If you do have a flush joints, it means you have a very even and level counter surface. If this is the case, you can use merely epoxy to mount the sink and may not need virtually any screws and brackets beneath. In either case, be sure to allow the epoxy to dry for the amount of time shown on the packaging. Usually do not touch the sink at all during this period.

Image Editor

Inianwarhadi-

You can edit this image using this Inianwarhadi Tool before save to your device

You May Also Like